Regulations & Other Links

This page is always under development - check back to see frequent updates
Table of Contents

 


Asbestos

Class Definitions according to OSHA Standard 1926.1101
  • Class I asbestos work means activities involving the removal of TSI and surfacing ACM and PACM. 
  • Class II asbestos work means activities involving the removal of ACM which is not thermal system insulation or surfacing material. This includes, but is not limited to, the removal of asbestos-containing wallboard, floor tile and sheeting, roofing and siding shingles, and construction mastics. 
  • Class III asbestos work means repair and maintenance operations, where "ACM", including TSI and surfacing ACM and PACM, is likely to be disturbed. 
  • Class IV asbestos work means maintenance and custodial activities during which employees contact but do not disturb ACM or PACM and activities to clean up dust, waste and debris resulting from Class I, II, and III activities. 

OSHA Standard 29 CFR PART 1910 Occupational Safety and Health Standards (Subpart Z) - General Industry
Download 29 CFR 1910 Subpart Z 

OSHA Standard 29 CFR PART 1926 Safety and Health Regulations (Subpart Z) - Construction
Download 29 CFR 1926 Subpart Z 

Other Links

Return to Table of Contents



Lead

OSHA Standard 29 CFR PART 1910 Occupational Safety and Health Standards (Subpart Z) - General Industry
Download 29 CFR 1910 Subpart Z 

U.S. Department of Housing and Urban Development (HUD)

National Safety Council

U.S. Consumer Product Safety Commission

Other Links

Return to Table of Contents



Industrial Hygiene

Arsenic


Formaldehyde


Indoor Air Quality


Legionnaire's Disease


Noise


Silica (Crystalline)

Return to Table of Contents



Organizations

Return to Table of Contents

 

OHC is an equal opportunity employer.